国产无夜激无码AV毛片,黄a无码片内射无码视频,男人边吃奶边摸下面视频,激情偷乱人伦小说视频在线

歡迎光臨常州市靈纖紡織機械有限公司官網!
熱熔絲電話:18921279696   熱熔絲郵箱:wxlanhua@163.com
高速卷繞頭

未標題-2.jpg


未標題-3.jpg


主要技術參數 

項目單位
最高卷繞速度m/min≤4000
筒管規格mmΦ110x124x150
筒管夾頭長度mm150
最大卷裝直徑mmΦ360
槽筒電機頻率Hz50-120
槽筒電機功率KW0.18-0.5W
夾頭電機頻率KW50-100
夾頭電機功率KW2.2-4.4


1.1 技術參數 

1.2公用設施技術參數  

1.2.1氣控  

a.空氣質量 

    在空氣進入卷繞頭氣動控制元件之前,壓縮空氣至少要滿足下列要求:

        不純度:                           顆粒密度 最大20mg/m3 

        油污:                             最大1 mg/m3

        壓力結露點:                      在0.6MPa時,最大4℃

b. 壓力范圍 Range of Pressure 

    壓力P1:                          0.60±0.05MPa(輸入壓力)

    過濾精度:                          0.05μm 

    P2的實際使用壓力,要根據紡絲工藝現場,每臺機械單獨調整。

1.2.2電源 

    頻率范圍:                               50-60 Hz

    電壓                                      380V


Main Technical Parameter:


ItemUnit
Max winding speedm/min≤4000
Size of tubemmΦ110x124x150
Length of tubemm150
Max diameter of full packagemmΦ360
Frequency of barrel motorHz50-120
Power of barrel motorKW0.18-0.5W
Frequency of chuck motorKW50-100
Power of chuck motorKW2.2-4.4


1.1 Technical parameter

1.2 Technical parameters of utilities

1.2.1Air control

a. Air quality

    Before air enters the pneumatic control element of winder, the compressed air shall at least meet the following requirements:

        Impure rate:                Particle density max20mg/m3 

        Oil pollution:               max 1 mg/m3

        Pressure dew point:         max4℃, basis on 0.6MPa

b. Range of Pressure 

    Pressure P1:                0.60±0.05MPa(input pressure)

    Filtering accuracy:            0.05μm 

    P2 is actual use pressure, shall be adjusted separately for each machine according to the spinning process site。

1.2.2 Power

    Frequency range:                               50-60 Hz

    Voltage                                         380V